help with mechanical broadheads

[PSE deer hunter]

I am new to bowhunting and I need some help with mechanical broadheads they are shooting about 10in's off. I am shooting EASTMANS silver strike and cabela's.and they are shooting about 8" off
HELP!!!
They are hitting both to the left 8" to 10" off and the field points are hitting dead on at 20yds.

[lovestohunt]

You have to be more specific and give more info. 10" off in which direction? Do they shoot the same as your field points because I would assume that your field points would be off as well.

[iduckhunt]

Step 1 Check your vane clearance
Step 2 Set your arrow rest clearance
Step 3 check arrow rest and nock placement
Step 4 check your tiller
Step 5 Do a Bare shaft planing test correct for porpoising
Step 6 move to fine tuning
Step 7 move to super fine tuning


The best instructions I,ve for completing these steps is at www.martinarchery.com download and print their compound tech manual it will detail all the steps.

Good luck, it is not hard at all to set up and tune your bow.

look under the tech info and the 2006 manual and all the instructions will be there